Just purchased a new Denon receiver and everything is working OK except Spotify connect, it doesn't show as a device on the connect page. I can stream everything via AirPlay OK, but connect doesn't show. They are both running on the same network, but I wonder if there are any settings I need to consider for spotify specifically. I have tried searching the forums but haven't come up with anything so far. If anyone could point me in the direction of some help it would be much appreciated!
I did a network reset and set Denon receiver back on factory sdettings. It works fine now!
I have found the problem (at least mine) and the solution. Let me explain :
Spotify connect doesn't work when you don't use the DHCP function on the device. I had set my Denon AVR-X2100W with a static IP address (192.168.0.50 in my case), because it was easier to connect to the web interface with a static IP.
The Solution :
I found on the internet that there was a problem with the Spotify connect server once, but the problem was solved. If you have this problem a long time ago, it might be a good thing to retry before performing everything after.
By default, Denon AVR use DHCP function, that's why it works for everyone who performed a factory reset. If you don't know how to configure the network settings, you can do a reset too (here is the link : http://manuals.denon.com/AVRX2100W/EU/EN/GFNFSYvyalrwrt.php ).
Otherwise, you can modify this setting on your amplifier in Setup->Network->Settings->[DHCP : On] with the web interface or the remote.
If you still want to get a static IP for your amplifier, you can set an IP with your router. In many cases, your router is the ADSL modem from your internet provider. If you have a good internet provider (like mine, thanks Free from France), there is a way to set a static IP to a device, but the procedure is different for each router. If you have your own router, I think you know how to configure it.
Hope it helps ^^
1) Go into settings>network>turn off DCHP
2) Assign an IP address in your virtual network:
a. IP: 192.168.1.10->192.168.1.199 (just pick an IP)
b. Subnet Mask: 255.255.255.0
c. Gateway: 192.168.1.1
d. Google DNS is fine: Primary: 8.8.8.8, Secondary: 8.8.4.4
e. Proxy: Off
f. Click Save.
3) Go into router settings>DCHP Server>Static IP> assign that same IP to the Denon receiver MAC address.
4) reboot router, unplug, plug in receiver.
5) On receiver go back to settings>network>diagnostic. You should get 3 "OK"s.
6) go to "My computer" in widows and "network" (where you see all other computers/media servers on your network)
7) double click denon avr icon.
😎 click INPUTS>HIDE SOURCES
9) Enable : Internet Radio, Pandora, Media Server> Click "Set Network Contents"
10) Wait 60 seconds.
11) Go ahead and play via Spotify.
Support told me to:
This worked for me. Thank you!
Support told me to:
Looks now its working again. I had to use a different method for my x2100w
1. Switch the device to the source ONLINE MUSIC.
2. AVR X1100W / X2100W / X3100W: Hold down the "ZONE2 SOURCE" and "DIMMER" buttons simultaneously for at least 3 seconds.
AVR X1200W / X2200W / X3200W: Hold down the "TUNER PRESET CH -" and "TUNER PRESET CH +" buttons simultaneously for at least 3 seconds.
AVR X4100W / X5200W / X7200W: Hold down the "DIMMER" and " CURSOR > " buttons ( under the front flap ) buttons simultaneously for at least 3 seconds.
AVR X4200W / X6200W / X7200WA: Hold down the "DIMMER" and "SETUP" buttons ( under the front flap ) buttons simultaneously for at least 3 seconds.
Got to do with Google devices, Android, Chromecast and HOME.
MDNS packets they sent are every 1 ms (milisecond). compared to for example iOS only every 3 seconds.
Causes disruptions. also other brands affected.
possible work-around:
Create a guest network with disabled intranet access on your router and assign your Marantz/Denon to that guest network along with a reserved DHCP IP.
Connect to the guest network with PC/Laptop and find the Marantz/Denon in within Spotify. Then move your PC/laptop back to the normal network as Spotify remembers Spotify Connect units. U can now play music to you Marantz/Denon from both your PCs and android phone without issues.
Remember this is a temp solution and may not work or be ideal for everyone.
I think the only definitive solution is downgrade to the penultimate firmware version and not upgrade to the current version. Done on my X1200W and spotify working again correctly.
Thanks for the info, I have sent the info to the right team.
Best regards
I did a network reset and set Denon receiver back on factory sdettings. It works fine now!
That's great!
I have found the problem (at least mine) and the solution. Let me explain :
Spotify connect doesn't work when you don't use the DHCP function on the device. I had set my Denon AVR-X2100W with a static IP address (192.168.0.50 in my case), because it was easier to connect to the web interface with a static IP.
The Solution :
I found on the internet that there was a problem with the Spotify connect server once, but the problem was solved. If you have this problem a long time ago, it might be a good thing to retry before performing everything after.
By default, Denon AVR use DHCP function, that's why it works for everyone who performed a factory reset. If you don't know how to configure the network settings, you can do a reset too (here is the link : http://manuals.denon.com/AVRX2100W/EU/EN/GFNFSYvyalrwrt.php ).
Otherwise, you can modify this setting on your amplifier in Setup->Network->Settings->[DHCP : On] with the web interface or the remote.
If you still want to get a static IP for your amplifier, you can set an IP with your router. In many cases, your router is the ADSL modem from your internet provider. If you have a good internet provider (like mine, thanks Free from France), there is a way to set a static IP to a device, but the procedure is different for each router. If you have your own router, I think you know how to configure it.
Hope it helps ^^
I had the same issue and applied your fix, after hours of research.
it works !!!
I wonder why this is not written anywhere in the documentation.
Thanks
I often enough changed the network settings on my x4100 from static to dhcp to wlan and back again. Sometimes it helped, sometimes not, with no preference for any of the settings. Most stable for me is fixed IP via cable. After this seemed to work for quite some time, I now have a new issue which bugs me. The spotify client on my PC does not detect ANY Spotify connect device anymore! However, when I start it, start some music on the PC and then go to another client (on my smartphone for example), redirect music to my Denon from there, lo and behold all devices are now on the list also on the PC client and from there on, I can use the AVR as a connect device as long as I don't switch it of. Whenever I switch it of it is back to start again :-(. Spotify is really great, Connect is a great idea and it is good so many manufacturers try to incorporate it but stability has been an issue for me right from the start.
Hi gaby-one,
your first paragraph does describe exactly the behavior I am seeing. Thx for this update, this is really depressing. Do you per incident know when this appeared? I am quite sure it worked correctly some weeks ago (only it took some tries to connect to the Denon correctly).
Yes, I am really sure that I use a fixed IP. I just switched from a Vodafone Easybox 904 (where I used fixed IP for the Denon for about six months) to a FritzBox. I tried DHCP with a static IP to MAC assignment and observed the above, thought "Dang, DHCP still not working" and went back to static, only to see the same. I am to lazy to switch back now because it works. Only right now I have to remember to always take a mobile device with me when I go up to my gallery to use the PC...
best regards, Christian
My network configuration is in the attachement...
I am having the same issue. Two days ago I unplugged my X3100w and plugged it back in and it worked. But not working again.
I just tried it and it's working! I could play a few songs.
I'll try more today afternoon, just to make sure it's really working.
I think it's not the Denon problem, I have same problem on my ONKYO 626 - cannot find onkyo device on Spotify connect, but other devices ( as android mobile) I can see good. Can't understand what's happened whith Spotify connect and what can I do with thid problem...
Is this the PC/Windows version of Spotify? If so, please see above. It seems it has a problem with embedded devices like AVRs right now. Start your Spotify session on your mobile, connect to AVR via mobile. When this is successful, the AVR is now also managable via Spotify connect on your PC UNTIL the session breaks (you switch of PC or AVR). After that, restart the procedure :-(.
I have raised official request to Spotify .... it works like you described there is one device (company laptop) from where I can initate session and then control it from other devices as well (except PC where I do not see at all icon for spotify connect 🙂 ). Neverthless this really seems to be spotify issue and not AVR issue. Looking forward for response from spotify guys.
Im not sure how they always manage to screw connect up with every client update i dont pay for this crappy service!
Spotify get your QA together or hire community testers with different devices.
Spotify Connect has not worked right in a week+, devices are not talking to each other and nothing connects to my Denon X3100w. I use Spotify Connect with my Denon mulitple times a week and also pay $12CDN a month for this service. This is the second big outage I've experienced since I joined Spotify last May.
Kind of the same story with me. I have a Denon AVR-X3100W. I can start spotify connect from my Windows client (v1.0.24.104) and then I can go to my Android phone and use the Spotify client there to control my Denon receiver. And this works as long as the session is active.
But when I turn my receiver off and try to initiate the session from my phone again. It doesn't work. I can see the receiver, but when I push on it it says connecting and then nothing happens. When I go to my PC it works instantly. One time in like 40 tries or so it does initiate from my phone. Extremely frustrating.
I also have an android tablet. Same story. So it's no specific problem with just my phone. All my android devices can't initiate a spotify connect session with my receiver.
Since I can start the session from my Windows PC it's not a Denon issue because then I would not be able to initiate a session from the Windows client also. It's clearly a problem with the android client.
Please fix this Spotify. We all payed a lot of money for our receivers and are paying you monthly for your service so we should get the service we deserve and pay for. I wany my receiver just to work everytime I hit the spotify connect button on my phone.
I have had same problem about one week especially in evenings. I cannot find music or change track. I have Spotify apps in my laptop and ipad, iphone and android phone and the same provlen is existing with all devices. Now I am playing via Airplay and that works. Mayde I will test D.....er 🙂
By the way this is not a first time when Spotify Connect is not working. I feel that there is problems quite often...
No. Just started Spotify, does not show any connect devices on the PC. Started Spotify on my smartphone, Denon is there. Redirect music via smartphone, Denon also is shown in the PC client. So, still some work to do for the developers...
Hello,
same problems with my Marantz NR1605.Receiver won't show up on PC. Via Android phone showed up, but no connection to receiver possible.
Switched my router today into dual stack mode ipv4 + ipv6. Was in ipv4 mode before. Now my router has two IPs, a v4 and a v6. All connect problems gone so far. Can see my receiver on PC and Android. Connection without problems. Let's see how long 🙂
Cheers
Frank
There was a new version of the Spotify client on Android today. I've installed this new version on my devices and with this version I can initiatie streaming to my Denon AVR-X3100W receiver. Hopefully this time it keeps on working. I also hope this new version solves the problems for the other people on this thread.
If you're not sure what the settings are, have a look at network - > settings before and write everything down. Now switch DHCP of and enter the same settings as you've written down. This should so the trick!