Hi there,
I have an Onlyo NR-616 with the latest firmware, when I open Spotify Connect on my mobile device (Samsung S3) my Onkyo reciever is not listed. How can I remedy this?
Thanks in advance
Jevon
The solution that
luigidelgado1
posted worked for me. TX-NR636. Changed the Name to TXNR636 under the IP of the Onkyo Receiver and in the Router Menu (FritzBox). DHCP was on. Bevore that I already did a Reset of the Onkyo and Firmware update. Also reinstalled the app on the ipohne. Which was without sucess. But the renaming solved it!
Thanks man!
I have Integra 20.4 have problem.
Use browser open the device IP.
Change the Friendly Name from "DTR-20.4" to "DTR20.4"
It is work !!!!!
Bravo!!
Really appreciate the reply.
I've got the Onkyo adapter on one of my TX-NR515s, and I have the other one connected to a wired network. They both work with Spotify sometimes, and sometimes they don't. I also have multiple android phones, and sometimes one will work and another won't. It all seems rather random.
I also bought a couple of those Google Chromecast devices and plug them into receivers and TVs. Spotify works with them very reliably. The only problem with them is that my receiver's Zone 2 does not work with HDMI inputs. The workaround to that is to route the audio through the TV, and set the receiver and TV so that the sound goes back from the TV to receiver, then play the TV/CD setting on Zone 2 🙂 . Very Rube Goldberg-ish.
The bottom line for me is that if I buy enough gadgets I can always get something to work for me.
Thanks again.
Got same problem - can find the device but wont connect -.-
If it wont work no spotify for me
luigidelgado1
You are a GENIUS!
My NR-616 had the Friendly Name of "TX-NR616", editing this to "TXNR616" (i.e. removing the hyphen/minus sign) and clicking SAVE and the Amp instantly appeared in the Devices list on my iOS Spotify app.
I was struggeling with my Onkyo TX-NR616 for over a year. It only worked when I switched the Onkyo from DHCP to manual, save and then switch back again to DHCP
However, after installing this [1] update on my Apple Airport all the problems dissapeared.
Hello, all!
I have the same problem with my Onkyo TX-8050 connected to router via ethernet cable. It is not appear in device list on PC and Android. Both can see each other in device list. Onboard Onkyo client works perfect, I can navigate and play music.
What is done:
1. last onkyo firmware installed
2. Reset done for onkyo and router.
3. dhcp option was set off and on.
4. Friendly name of Onkyo was changed to TX8050.
I do not have Onkyo WiFi adapter and no way to borrow it.
What can I do else to be able to control my amp using PC or android application?!
I would appreciate for your suggestions!
In my case the NR636 is showing in the list and until like 1-2 weeks ago, it was working just fine. By now i cannot connect to it anymore (tried it via iphone and desktop).
Latest firmware is installed. The log on the desktop
16:01:54.006 D [gaia_manager.cpp:1170 ] GAIA: TIMING(37996885) GaiaManager::sendHelloHelper 16:01:57.008 D [gaia_manager.cpp:1186 ] GAIA: GaiaManager::hermesDeviceCheck 16:03:15.436 D [gaia_manager.cpp:655 ] GAIA: TIMING(38078316) GaiaManager::playCurrentStateRemote (connect:AVR:::LOGGED_IN) mdns:SpotifyConnect._spotify-connect._tcp.local 16:03:15.436 D [gaia_connect_impl_v1.cpp:332 ] GAIA: TIMING(38078316) GaiaConnectImpl_V1::forceLogin 16:03:15.436 D [gaia_connect_impl_v1.cpp:303 ] GAIA: TIMING(38078316) GaiaConnectImpl_V1::loginUser 16:03:20.527 D [gaia_connect_impl_v1.cpp:128 ] GAIA: TIMING(38083407) GaiaConnectImpl_V1::onResult (empty JSON), retrying 16:03:20.527 D [gaia_connect_impl_v1.cpp:303 ] GAIA: TIMING(38083407) GaiaConnectImpl_V1::loginUser 16:03:25.571 D [gaia_connect_impl_v1.cpp:81 ] GAIA: GaiaConnectImpl_V1::requestFailed: cmd=1, device=mdns:SpotifyConnect._spotify-connect._tcp.local, error=3 16:03:25.571 D [gaia_manager.cpp:2004 ] GAIA: GaiaManager::deviceLoginFailed: mdns:SpotifyConnect._spotify-connect._tcp.local (pending 1)
Thanks a lot, removing the hyphen in the friendly name of my onkyo tx-nr515 did the trick, I can now see the device in the spotify android app
Hi there. Lately I have the same problem with spotify connect on my Onkyo TX-RZ900. It was working fine for few months and now it doesn't. I cannot find reason for this. Any help will be appreciated. Cheers
Hello.
I did tried changing the name in the network but using receiver's menu only. Do you think that logging with a browser will do the trick? I'm gonna try later and let you know.
Unfortunately it doesn't work for me. DLNA works, Spotify not.
Same here. My receiver is Onkyo TX-NR5010. It is visible on the list but cannot connect. I changed the name and removed hyphen..
The phone app e.g. Onkyo Controller and Spotify will work simultaneously- Controller shows the art and volume, however the search and the rest of the controls are on the Spotify screen. To anable your receiver you'd need to go to Settings...Spotify....Devices...Connect To Device. Spotify shows your device (Onkyo) and if you're a Premium user it can be clicked/switched to. Otherwise only your phone is highlighted and the receiver is only listed.
The solution that
luigidelgado1
posted worked for me. TX-NR636. Changed the Name to TXNR636 under the IP of the Onkyo Receiver and in the Router Menu (FritzBox). DHCP was on. Bevore that I already did a Reset of the Onkyo and Firmware update. Also reinstalled the app on the ipohne. Which was without sucess. But the renaming solved it!
Thanks man!
I have Onkyo NR 636. I use desktop spotify. It is not showwing connection list. If I reboot the pc it is visable again. How to solve this? Every time rebooting is iiritating.
The onkyo receiver is in my network list so it is connected. Why can't I see the connection in the list?
Does not work for me. And why it was working before? Something changed in a update from spotify I think.
My problem first was that even though the receiver was found by my Spotify app it would not connect. But then the Onkyo receiver will even disappear from the Spotify app.
To solve this I used a laptop to connect to the web configuration interface of the receiver (simply open your browser and go to the IP assigned to your receiver) and changed the name in the network by removing any special character, specifically I removed the hyphen so I went from TX-414 to TX414. Avoid special characters and spaces. Also make sure you are using DHCP.
This made the trick for me.
Edited: to make it more clear to understand.