Denon AVR-X2100W - No Spotify Connect

Just purchased a new Denon receiver and everything is working OK except Spotify connect, it doesn't show as a device on the connect page. I can stream everything via AirPlay OK, but connect doesn't show. They are both running on the same network, but I wonder if there are any settings I need to consider for spotify specifically. I have tried searching the forums but haven't come up with anything so far. If anyone could point me in the direction of some help it would be much appreciated!

Child Item
Child Item
Child Item

Accepted answers

Hi, I had the same issue. I fixed it by switching to static ip (DHCP off). Spotify connect is working like before now!
If you're not sure what the settings are, have a look at network - > settings before and write everything down. Now switch DHCP of and enter the same settings as you've written down. This should so the trick!
Just got a Spotify update this morning on my phone Version 3.5.0.963. AVR X2100W working this morning

I did a network reset and set Denon receiver back on factory sdettings. It works fine now!

I have found the problem (at least mine) and the solution. Let me explain :

 

Spotify connect doesn't work when you don't use the DHCP function on the device. I had set my Denon AVR-X2100W with a static IP address (192.168.0.50 in my case), because it was easier to connect to the web interface with a static IP.

 

The Solution :

 

I found on the internet that there was a problem with the Spotify connect server once, but the problem was solved. If you have this problem a long time ago, it might be a good thing to retry before performing everything after.

 

By default, Denon AVR use DHCP function, that's why it works for everyone who performed a factory reset. If you don't know how to configure the network settings, you can do a reset too (here is the link : http://manuals.denon.com/AVRX2100W/EU/EN/GFNFSYvyalrwrt.php ).

Otherwise, you can modify this setting on your amplifier in Setup->Network->Settings->[DHCP : On] with the web interface or the remote.

 

If you still want to get a static IP for your amplifier, you can set an IP with your router. In many cases, your router is the ADSL modem from your internet provider. If you have a good internet provider (like mine, thanks Free from France), there is a way to set a static IP to a device, but the procedure is different for each router. If you have your own router, I think you know how to configure it. 

 

 

Hope it helps ^^

1) Go into settings>network>turn off DCHP

 

2) Assign an IP address in your virtual network:

a. IP: 192.168.1.10->192.168.1.199 (just pick an IP)

b. Subnet Mask: 255.255.255.0

c. Gateway: 192.168.1.1

d. Google DNS is fine: Primary: 8.8.8.8,  Secondary: 8.8.4.4

e. Proxy: Off

f. Click Save.

 

3) Go into router settings>DCHP Server>Static IP> assign that same IP to the Denon receiver MAC address.

 

4) reboot router, unplug, plug in receiver.

 

5) On receiver go back to settings>network>diagnostic.  You should get 3 "OK"s.

 

6) go to "My computer" in widows and "network" (where you see all other computers/media servers on your network)

 

7) double click denon avr icon.

 

😎 click INPUTS>HIDE SOURCES

 

9) Enable : Internet Radio, Pandora, Media Server> Click "Set Network Contents"

 

10) Wait 60 seconds.

 

11) Go ahead and play via Spotify.

Support told me to:

- Power On
- Switch to Online Music source
- Press & hold TUNER PRESET CH + and TUNE - until "Initialization..." displays on FL Display
 
However, after doing that, I tried again and I can see on the LCD: "Connecting..." then "Assining..." and then back to Favorites, in other words, still didn't work. Then I tried again and nothing. No more messages, only the app says "Connecting..." then goes back paying on the iphone. I can however play on my other receiver and my PC. Just not the Denon PC.
 
Maybe someone else has better luck.

This worked for me. Thank you!

 

Support told me to:

- Power On
- Switch to Online Music source
- Press & hold TUNER PRESET CH + and TUNE - until "Initialization..." displays on FL Display

Looks now its working again. I had to use a different method for my x2100w


1. Switch the device to the source ONLINE MUSIC.

2. AVR X1100W / X2100W / X3100W: Hold down the "ZONE2 SOURCE" and "DIMMER" buttons simultaneously for at least 3 seconds.

AVR X1200W / X2200W / X3200W: Hold down the "TUNER PRESET CH -" and "TUNER PRESET CH +" buttons simultaneously for at least 3 seconds.

AVR X4100W / X5200W / X7200W: Hold down the "DIMMER" and " CURSOR > " buttons ( under the front flap ) buttons simultaneously for at least 3 seconds.

AVR X4200W / X6200W / X7200WA: Hold down the "DIMMER" and "SETUP" buttons ( under the front flap ) buttons simultaneously for at least 3 seconds.

Got to do with Google devices, Android, Chromecast and HOME.

MDNS packets they sent are every 1 ms (milisecond). compared to for example iOS only every 3 seconds.

Causes disruptions. also other brands affected.

possible work-around:

Create a guest network with disabled intranet access on your router and assign your Marantz/Denon to that guest network along with a reserved DHCP IP.

 

Connect to the guest network with PC/Laptop and find the Marantz/Denon in within Spotify. Then move your PC/laptop back to the normal network as Spotify remembers Spotify Connect units. U can now play music to you Marantz/Denon from both your PCs and android phone without issues.

 

Remember this is a temp solution and may not work or be ideal for everyone.

 

I think the only definitive solution is downgrade to the penultimate firmware version and not upgrade to the current version. Done on my X1200W and spotify working again correctly.

 

http://firmware.denon.eu/index.php

All comments

Hi AlexAtanassov, 

 

How did you contact Denon so that they would really listen to you? 

Just E-Mail or some contact form on their Website?

 

Thanks in advance! 

If its possible could you let me know what FW version your X4100W is on?

Dear Sirs,

 

I have deleted Spotify app from cell phone. The problem has not been solved. Phone is ringing, I pick it up, Denon is kicked off from network. I do not have any idea how it can happen.

 

Hopefully we will receive firmware update soon. This issue is very annoying...

 

BR, Tomi5

Hey,

I have a AVR-X2200W with the same issue since last firmware update. The Denon even brakes the stream to my chrome casts when they are playing. I think it has to do with the Zeroconf network, when the phone is out of standby it checks the devices in the zeroconf (chrome cast etc.) then Denon crashes and brings the network down.

I have now disconnected the Denon from my LAN and run the music thru my chrome cast with out problems. As soon as i reconnect the LAN cable to the Denon and interact with a phone it all crashes.

Denon have to release a new firmware with a fix!

Email support Denon UK

Regards

Already done some week ago, but no response.

@ Velotime

X4100W firmware I have is 6005-3195-6094-07

I have a DENON AVR-S900W

Recently I was having some issues with Spotify not working. I did a factory reset on the device. (You can find this in your manual) or click this link.

 

http://manuals.denon.com/AVRS900W/NA/EN/GFNFSYvyalrwrt.php

After the factory reset I went into the Denon's network settings and I turned OFF DHCP. I gave the DENON a STATIC IP address. Then I went into my router and reserved that IP. It can no longer have an IP conflict.

Things are now working fine. Hope this helps someone.

 

Denon AVR-X3100W

 

Denon firmware:
-  25/10/2017
-  FW VER 1600-3161-6072

 

I do have exactly the same issues. Since the last Denon fw update the problem was getting worse and worse. At the moment a Android 6 of 7 phone is entering / connecting my network the Denon IP Stack is reinitializing. The Denon is already using a static IP address. 

Next step is trying to keep out the Androids for A couple of days.

I think your solution just worked for me. Can't believe it! Thank you very much!

What solution? Static ip address? 

Factory reset and setup form scratch with static IP and DHCP off. Still the same problem.

As long as phone is in standby no problems, switch it on and Denon brakes the stream to either the playing Chrome Cast Audio or it self. Disconnect it from the network and the CCA is working with out problems.

AVR-X2200W FW 4400-9380-4021 dated 09.11.2017

I have the same problem with my Denon DNP730AE and it started about a month ago. I'm not sure where the problem lies but it makes my Denon unusable and my Spotify Premium subscription a waste of money.

 

I've been in contact with Spotify via Twitter and they have asked some basic questions. I've also sent them a video to show it happening. No news yet though.

 

Interestingly I also have a 2nd Denon device, an N4 Piccolo. This used to have direct Spotify integration but changed to Spotify Connect about a month ago (a coincidence?) but it works ok. This makes me think the Denon DNP730AE firmware might be the issue. Denon haven't answered an email I sent though.

 

I have exactly the same problem with Denon Avr 2200 X, started with the last firmware update for me, also crashes chromecast when I wake up my Samsung S8. My family hates me for waking up my phone in the middle of the movie. Gonna try factory reset with static ip tomorrow.

 

Denon has to get their act together 

Got to do with Google devices, Android, Chromecast and HOME.

MDNS packets they sent are every 1 ms (milisecond). compared to for example iOS only every 3 seconds.

Causes disruptions. also other brands affected.

possible work-around:

Create a guest network with disabled intranet access on your router and assign your Marantz/Denon to that guest network along with a reserved DHCP IP.

 

Connect to the guest network with PC/Laptop and find the Marantz/Denon in within Spotify. Then move your PC/laptop back to the normal network as Spotify remembers Spotify Connect units. U can now play music to you Marantz/Denon from both your PCs and android phone without issues.

 

Remember this is a temp solution and may not work or be ideal for everyone.

 

Hi, I have exactly the same problem with my Marantz MCR611. Everything used to work fine but now the Marantz srope when I activate my mobile phone or tablet. I do not think it has anything to do with Spotify because the system also crashes when my wife uses her phone and she does not have Spotify on her phone.
I have tried everything, several resets, static IP, DHCP on/off but nothing works ...

This seems to be a google cast problem that occurs when you have google home (mini) devices in your network.

 

vTuner playback (on Denon AVR) will also be havily disturbed as soon as an Android phone wakes up. The interference is greater the longer the phone has been in standby before.

Weird!

With latest update I cannot see Chromecast which I used to see always, but I see again my Denon avr x2100w which I did not see anymore since 1 month... 

I think the only definitive solution is downgrade to the penultimate firmware version and not upgrade to the current version. Done on my X1200W and spotify working again correctly.

 

http://firmware.denon.eu/index.php

I've downgraded the firmware on my Denon DNP-730AE and it seems better, not perfect but better.

yes, before it was a network crash, now (later downgrade) is a small noise from speakers (in some occasions when turning on mobile) but working without downfall 🙂

Nice! Hopefully Google will get a fix out soon. At least the mystery is solved...

Let's hope they'll fix it soon.
A proposed workaround is to connect the AVR with a guest network. But how can I connect my AVR (wired, not wifi) with the guest network ?

You would really need something like a switch as by far most routers won't support this I'm affraid.

Might want to read below example.

https://apple.stackexchange.com/questions/65323/what-do-i-need-to-provide-a-wired-guest-isolated-access-to-my-home-network

Hi Ferdie1,

 

some routers support the assiciation of the guest network to one of their LAN ports.

For example within my Fritz Box 7362SL, I can configure guest network to LAN port 4.

Devices connected to that port would then get connected to the guest network.

 

Cheers,

nitrocb 

I have the Denon AVR-S720W

I use Spotify Connect a lot, powered either by my MacBook Pro or my Google Pixel. Regardless of the source though, when I wake up my Google Pixel phone, there is tremendous STATIC for about 5 seconds. 

All devices are on the same Wifi. 

FWIW I have the Google Wifi product. 

I have a Denon AVR-X2300 and since the last firmware update there was, I did not work spotify connect, that is when I entered the spotify application either from my IPad or my Samsung Galaxy Note 8 or the PC, no it appears on available devices! can someone tell me how to fix it? I have tried by all means but nothing ... I only connect via Bluetooth. It is all connected to the same network via WiFi, and the denon via Ethernet cable!

Hi, I don't think this has got to do with this thread. however you could try a full reset of AVR:

Use the buttons on the device itself for the reset
1. Switch off the mains voltage with the <ON / STANDBY> button.
2. Hold down <ZONE2 SOURCE> and <DIMMER> while pressing <ON / STANDBY>.
3. Release the two buttons as soon as the display starts flashing at an interval of approximately 1 second.

You will need to completely perform initial setup again

Then also turn off your router 10 mins and back on.

Hi all,

 

now I am sure my issue has to do with the Google settings. See the link from ThorOppenheimer (thanks !).
The solution for Andriod devices is : go to settings --> Google --> Cast Media Controls and undo. Now (do not fotget) turn your device off and back on.
I can play my Marantz and opening my Android devices will not turn the music off anymore. When I try to start Spotify connect most of the time it does not see my Marantz, but when I turn my Marantz off and back on I can connect without any problem.
Good luck and hopefully Google will repair the issue.

Child Item
Child Item